(The device on the left is AD106, which has NO Swtich cable in the parcel, and NO Spotlights on the stand. The one on the right is AD106S)
One microscope can solve problems in at least 6 fields.
Like most of Andonstar microscopes, AD106/AD106S provides big working space to users.
The top of the lens can go up to 18cm to the base. And the buttom of the lens can go up about 11cm high.
Meanwhile, the optical bracket can spin 360 degrees, which actually enlarged the working space a lot.
Heat, oil, smoke, and other things that would probably polute or damage your lens, We solve them ALL. The lens cover can protect the lens from shaking, falling down etc. And then, the UV filter can prevent the polution and damage from the base direction. Actually a UV filter can also reduce reflect lights, which provides a better image quality and better using experience.
AD106S provides multiple light sources from different directions. In this case, there would be much less shadows and reflection.
This time, we also provide a movable block(optional), which can give light from the bottom. This design would be very useful in some fields, such as jewelry appraisal, biology slides etc.
Though there are buttons at the front side of monitor, AD106S also comes with a AI remote. You can do some simple work with it, like capture videos and pictures, or digital zooming in&out.
Buttons are useful, but when the image goes hundreds times up, you don’t want an even slight shaking when you take pictures, in which case, the object you try to capture may disappear from the sight.
Everyone knows that plastic stand is much cheaper and lighter than a metal one. But none of our products so far comes with a plastic stand. Why?
As a manufacturer, of course we’d like to cut cost, but we just don’t want our fancy camera comes with a shaky stand, base of which would be easy to leave marks on or probably melt if the temperature goes too high. Also, you can tell the difference when you adjust the height of it: the metal one can be much more precisely. And being precise is very important for microscopes, especially when its continuously zoom.
During soldering or repair work, we may need to use hot air guns, electric irons and other soldering tools, which can cause heat and smoke.
And heat and smoke are bad for the lens, expecially when the lens is mainly coverd by plastic material. In this case, we provide customers a UV filter, which can not only protect the lens, and also, reduce the reflection and stray lights
